自辐射场下UN2分子的光谱研究

对铀原子和氮原子分别使用相对论有效原子实势和6-311+G(d)基组, 采用优选的密度泛函B3P86方法, 研究了铀本身产生自辐射场(-0.005–0.005 a.u.)作用下UN₂基态分子的能隙E_g和谐振频率ν. 结果表明: UN₂分子在自辐射场中反对称伸缩振动频率ν₃(σ_g)和对称伸缩振动频率σ₁(σ_g)与实验值1051.1 cm^-1和1008.3 cm^-1 基本符合; E_g随自辐射场场强的增大而趋于减少, 占据轨道的电子容易被激发至空轨道而形成激发态; UN₂分子在自辐射场中趋于不稳定, N₂, O₂等更容易扩散到表面内层而腐蚀铀表面, 加剧了铀在自辐射场中的腐蚀.     

编码孔径光谱成像仪光学简化彗差对图谱反演误差分析

编码孔径光谱成像技术是近年来发展起来的一种新型光谱成像技术, 该技术在一次像面采用特定的编码模板对目标进行编码, 结合特殊的采样成像方式, 获得满足景物重构的采样数据量, 实现了空间信息和光谱信息的高精度重构, 具有高光通量、高信噪比等优势.但该技术实际的光学系统设计, 以及相应加工和装调过程中各种误差的存在, 将逐一传递反映到探测器精度与编码后图谱采样精度的不匹配, 这会引发最终重构图谱质量降低.本文侧重分析研究光学系统设计和研制装调中光学彗差相对设计值间存在的偏差, 通过几何光线追迹与波前像差联合计算的方法, 在成像面仿真出不同数值程度的彗差矩阵, 并以此来分析不同彗差下对重构图像质量的影响结果.并用其分析结论作为依据, 改进了编码孔径光谱成像仪的设计和研制, 提供了相应图像成像反演结果, 由此确保了编码孔径光谱成像仪的成像优势.     

基于波导、金和氧化锌的随机激光器的研究

通过将金属金嵌入到上下两层波导结构中,与ZnO随机粒子相结合,设计出一种新型结构的随机激光器。采用时域有限差分法(FDTD),数值模拟了该随机激光器系统的光场分布和模式频谱图,并针对金粒子和金薄膜两种情况进行对比分析。结果显示,采用金粒子作夹层时,出射激光模式数量减少,单色性较好;采用金薄膜作夹层时,出射激光光强较大。     

部分相干平顶光束在非Kolmogorov湍流中的湍流距离

给出了部分相干平顶光束通过非Kolmogorov湍流传输的湍流距离解析表达式,并研究了非Kolmogorov湍流的湍流广义指数、内尺度、外尺度和光束参数对部分相干平顶光束湍流距离的影响。研究表明:湍流距离随相干参数、束腰、外尺度(当湍流广义指数的取值为3.6~4.0时)的增大而减小;随光束阶数、内尺度的增大而增大;随湍流广义指数先减小后增大,且在湍流广义指数取3.11时存在极小值,即光束扩展的极大值。同时利用湍流广义指数及光束参数,具体比较了湍流距离与瑞利区间的大小,并指出光束参数及湍流广义指数决定了湍流是否在瑞利区间内就能对光束扩展构成明显的影响。     

Conformational stability and vibrational study of phenylacetyl chloride

The Fourier transform infrared spectroscopy and Fourier transform Raman spectra of phenylacetyl chloride were recorded and analyzed in the range 3500–400 and 3500–200 cm^?1 at room temperature, respectively. In order to obtain the structural information and conformational stabilities, a potential energy surface scan for internal rotation was carried out at the B3LYP/6‐31G(d) level. The potential energy surface reveals that the title compound has two minimal conformers (A and B). The optimized geometries, structural parameters, stabilities, energies, thermodynamic parameters, vibrational wavenumbers, infrared intensities, and Raman activities for the two conformers (A and B) have been obtained by employing B3LYP and MP2 calculations with 6‐311++G (d, p) basis sets. The conformational energy difference between A and B is very small, indicating that the B conformer coexists with the A conformer. The detailed vibrational assignments of vibrational spectra of each conformer have been made on the basis of the potential energy distributions analysis. The highest occupied molecular orbital –lowest unoccupied molecular orbital energy gap and molecular electrostatic potential of the two conformers have been also calculated for comparison of their chemical activities. Copyright © 2015 John Wiley & Sons, Ltd.     

Determination of Thermal History by Photoluminescence of Core‐Shelled Quantum Dots Going Through Heating Events

A kind of novel thermal history nanosensors are theoretically designed and experimentally demonstrated to permanently record thermal events. The photoluminescence (PL) spectrum of core‐shelled quantum dots (QDs) CdSe/ZnS irreversibly shifts with heating histories (temperature and duration) of thermal events. The induced PL shift of the QDs CdSe/ZnS is employed to permanently record thermal histories. We further model a kind of thermal history nanosensor based on the thermal‐induced phenomena of core‐shelled QDs to permanently record thermal histories at microscale and demonstrate to reconstruct temperature and duration of heating events simultaneously from PL spectra of the QDs. The physical mechanism of the sensors is discussed.     

Near Infrared Spectroscopy of the Cretaceous Red Beds in Inner Mongolia DongshengmiaoSCIEI北大核心CSCD

Take the cores and surface weathered soil from the Cretaceous red beds in the western of Dongshengmiao mine of Inner Mongolia and analysis with near-infrared spectroscopy. The result shows that near-infrared spectroscopy can identify mineral quickly through the characteristic absorption peaks of each group. The Cretaceous red beds in the western of Dongshengmiao mine is argillaceous cementation, it is mainly composed of quartz, feldspar, montmorillonite, illite, chlorite, muscovite etc, the mineral composition is mainly affected by the upstream source area. The clay mineral like montmorillonite water swelling and uneven drying shrinkage expands the original crack and creates new cracks, reduces its strength, which is the mainly reason of its disintegration. According to the composition of clay mineral, we speculate its weathering process is mainly physical weathering, the climate during the weathering is cold and dry. The results can not only improve the geological feature of the mining area, but also show that the near-infrared spectroscopy technology can analyze the mineral composition of soil and rock effectively on the basis of Mineral spectroscopy, which demonstrates the feasibility of the near-infrared spectroscopy can analyze minerals in soil and rock quickly, that shows the feasibility in geology study, provides new ideas for the future research of soil and rock.     

A Terahertz Spectral Database Based on Browser/Server TechniqueSCIEI北大核心CSCD

With the solution of key scientific and technical problems and development of instrumentation, the application of terahertz technology in various fields has been paid more and more attention. Owing to the unique characteristic advantages, terahertz technology has been showing a broad future in the fields of fast, non-damaging detections, as well as many other fields. Terahertz technology combined with other complementary methods can be used to cope with many difficult practical problems which could not be solved before. One of the critical points for further development of practical terahertz detection methods depends on a good and reliable terahertz spectral database. We developed a BS (browser/server) -based terahertz spectral database recently. We designed the main structure and main functions to fulfill practical requirements. The terahertz spectral database now includes more than 240 items, and the spectral information was collected based on three sources: (1) collection and citation from some other abroad terahertz spectral databases; (2) collected from published literatures; and (3) spectral data measured in our laboratory. The present paper introduced the basic structure and fundament functions of the terahertz spectral database developed in our laboratory. One of the key functions of this THz database is calculation of optical parameters. Some optical parameters including absorption coefficient, refractive index, etc. can be calculated based on the input THz time domain spectra. The other main functions and searching methods of the browser/server-based terahertz spectral database have been discussed. The database search system can provide users convenient functions including user registration, inquiry, displaying spectral figures and molecular structures, spectral matching, etc. The THz database system provides an on-line searching function for registered users. Registered users can compare the input THz spectrum with the spectra of database, according to the obtained correlation coefficient one can perform the searching task very fast and conveniently. Our terahertz spectral database can be accessed at http://www.teralibrary.com. The proposed terahertz spectral database is based on spectral information so far, and will be improved in the future. We hope this terahertz spectral database can provide users powerful, convenient, and high efficient functions, and could promote the broader applications of terahertz technology.     

Glow Discharge Characteristics of Hollow Needle-Plate Electrode in Atmospheric Pressure ArgonSCIEI北大核心CSCD

Atmosphere pressure uniform plasma has the broad application prospect in the industrial field. Using hollow needle cathode - plate anode device excited by direct-current voltage, a uniform and stable glow discharge is generated at atmospheric pressure in ambient air with argon used as working gas. The influence of the experimental parameters (including gas flow rate and the gas gap width) on discharge has been investigated by optical method. It can be found that a glow-discharge plasma column can bridge the two electrodes. The plasma column is uniform, and no filaments can be discerned. Near the plate electrode, the diameter of the plasma column is largest of all positions. The maximal diameter of the plasma column increases with increasing the discharge current or the gas flow rate. Through electrical method, the voltage-current characteristic has been investigated. It has been found that the discharge voltage decreases with increasing the current which is similar with the characteristic of glow discharge in low pressure. It increases with increasing the gas gap width or the gas flow rate. By analyzing the optical emission spectrum scanning from 330 to 450 nm emitted from the direct-current glow discharge, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated as functions of the gas flow rate and gas gap width. Results indicate that both the vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 decrease with increasing the gas flow rate or the gas gap width. In addition, the molecular vibrational temperature and the intensity ratio of spectral lines I-391.4/I-337.1 have been investigated in spatial resolution along the direction of gas flow(plasma column axial), and give a qualitative analysis as well. It is found that the vibrational temperature and the average electron energy increase with increasing the distance from the hollow needle cathode. These results are important to the industrial applications of glow discharge.     

LABVIEW下冲击试验测试信号分析模块的设计

根据GJB冲击环境试验测试要求,介绍LABVIEW平台下两类典型冲击信号分析模块的设计方法,主要讲述利用多图层叠加编程技术实现GJB150.18-1986标准规定的半正弦波与后峰锯齿波动态套容差曲线分析模块的设计以及利用递归算法实现冲击响应谱分析模块的设计。其次,采用资源DLL封装技术对LABVIEW编程实现的冲击信号分析模块进行封装,在其他编程语言中调用DLL实现冲击信号分析模块在其他编程语言中的功能链接。实践表明,LABVIEW图形化编程技术可快速实现两类冲击信号分析模块的设计,将高速数据采集模块与冲击信号分析模块集成,可有效完成冲击试验测试与信号分析处理任务。